What Is The Weight Of A 4×8 Sheet Of 1/4 Inch Plywood?

Softwood plywood should weigh about 3 pounds per square foot, every inch of thickness, according to the document. Because the standard calls for pre-sanded sheets, actual plywood sheets weigh significantly less.

Weight chart for softwood plywood.

Actual Weight Thickness

22 lbs. 1/4″

28.5 lbs 3/8″

40.6 lbs 1/2″

48 lbs. 5/8″

After all, how heavy is a 4×8 sheet of treated plywood?

A 4′ by 8′ sheet of 3/4′′ softwood plywood weighs roughly 61 pounds on average.

Also, how do you figure out how much a sheet of plywood weighs? A metre of plywood weighs about 600 kilogrammes. The formula is easy to remember: Length x Width x Height x 600.

What is the weight of a 4×8 sheet of 1/4 inch plywood in this case?

Table of contents

Weight per unit of material

Masonry Structures

2.60 ppsf 5/8 inch (83.2 pounds per 4×8 sheet)


0.71 ppsf 1/4 inch (22.72 pounds per 4×8 sheet)

What is the weight of a 4×8 sheet of MDF?

1/2″* 3/4″*

90.00 90.00 4′ x 8′

4′ x 16′ (194 sq. ft.) “) 180.00 195.00 ) 180.00 195.00 ) 180.00 195.00

2′ x 16′ (194 sq. ft.) “( 100.00

Weight 66 LBS 96 LBS 4′ x 8′

Related Questions

What is the maximum weight that a 3/4-inch plywood can support?

Weight: 50 lbs.

What is the weight of a 1/4 sheet of plywood?

1/2 inch (15/32) Plywood is 1.42 pounds per square foot, which equals 40.6 pounds. 11/32″ (3/8″) Plywood weighs 28.5 pounds per square foot at 1.12 per square foot. 1/4” 1.45 per square foot = 22.0 lbs. Plywood = per square foot = 1.45 per square foot = 22.0 lbs.

What is the price of a 3/4 sheet of plywood?

Plywood for Cabinets

Thickness Type Price

a third “Hardwood Sandeply


a quarter “Plywood made of oak


a half “Plywood, Oak $42.97

a half “$41.97 birch (3 ply)

Is treated plywood available?

This plywood has been pressure-treated to prevent termites, fungal deterioration, and rot. It’s possible to paint or stain this plywood. Treated plywood is both safe and environmentally friendly when used appropriately.

What is the weight of a 1/2 sheet of plywood?

8 pounds per square foot, weighing slightly over 25 pounds per sheet, while 1/2-inch-thick birch plywood is projected to weigh 1.5 pounds per square foot, weighing around 48 pounds using the engineering method.

Is it possible to paint pressure-treated plywood?

Paint can be applied to pressure-treated wood, but it must be done correctly or the paint will not last long. Cleaning treated wood may appear to be a superfluous step in the painting process, but the wood may have picked up dust, dirt, and debris on the way from the manufacturer to your home.

What is the weight of a 4×8 sheet of OSB?

Osb and plywood have similar weights: The weight of 7/16-inch osb and 1/2-inch plywood, respectively, is 46 and 48 pounds. 3/4-inch Sturd-I-Floor plywood, on the other hand, weighs 70 pounds, which is 10 pounds less than its osb cousin.

What is the lightest plywood available?

The lightest sort of plywood available is usually veneer core hardwood plywood. The material’s core is formed of fir, which is a light wood, and a wood-grain veneer is applied to one side of the board.

What is the thickness of 1 4 inch plywood?

Millimeters Thickness

Measurement of thickness (inch)

Measurement of thickness (milimeter)

1/8” 3.2mm

1/4” 6.4mm

5/16” 8mm

3/8” 9.5mm

What is the weight of a 2×4?

A 2-by-4 made of green lumber with an 8-foot length weighs 13 pounds. A 12-foot-long 2-by-4 made of green lumber weighs 20 pounds. A 8-foot-long pressure-treated 2-by-4 weighs 17 pounds.

What is MDF plywood, and how does it differ from other types of plywood?

MDF is an engineered wood product created by breaking down hardwood or softwood residuals into wood fibres, usually in a defibrator, mixing it with wax and a resin binder, and shaping it into panels by applying high temperature and pressure. MDF has a higher density than plywood.

What is the weight of a sheet of 1/2 drywall?

As a point of comparison, standard 1/2 “The average sheet of drywall used in interior residential construction weights roughly 1.6 pounds per square foot, totaling 51.2 pounds. a 5/8 inch “A typical sheet of drywall, which is utilised to achieve fire ratings, weighs around 70 pounds.

What is the price of a 4×8 piece of plywood?

A 4×8-foot sheet of construction-grade plywood costs about $10, but an OSB sheet of the same size costs only $6. Both are around the same price to install, with a carpenter charging $70 per hour. Installing either sheathing over a 500-square-foot area would cost approximately $160 in plywood and $100 in OSB.

What is the weight of 12mm plywood?

Plywood for Structural Use

Product Information Pack Dimensions Approximate Weight

60 16-17mm 2400 x 1200 x 9mm (5 ply)

45 21-22mm 2400 x 1200 x 12mm 2400 x 1200 x 12mm

35 27-28mm 2400 x 1200 x 15mm 2400 x 1200 x 15mm 2400 x 1200 x 15mm

30 31-32mm 2400 x 1200 x 17mm 2400 x 1200 x 17mm 2400 x 1200 x 17mm

What is the weight of particle board?

Weights of Wood and Panels

Weights of Panels

1/8′′ or 2.6mm 1′′ or 25mm Pounds per Square Foot

4.38 Particle Board

Melamine and Domestic Hardwood Panels with Particle Board Cores 4.85

Hardwood Import VC 0.33 2.80

What is the weight of a 2x4x8?

Boards of Kiln-Dried Lumber

the amount of weight (lb)

Length (in x in) Nominal Dimension (ft)

2 x 4 11 16 2 x 4 11 16 2 x 4 11 16 2

16 24 2 x 6

2 x 8 = 21 32

What is the weight of a board foot of Walnut?

Divide the pounds per cubic foot by 12 to get the average dry weight per board foot.

Dry Weight Average

Species Name Average Dry Weight (kg/m3)

Peruvian Walnut (600) 37 lbs/ft3

Walnut, 38 lbs/ft3 (610)

610) Figured Walnut, 38 lbs/ft3

Koa, 38 lbs/ft3 (610)


Please enter your comment!
Please enter your name here

Read More