What Is The Weight Of A 4×8 5/8 Sheetrock?

74 kilos

Aside from that, what is the weight of a sheet of 5/8 drywall?

As a point of comparison, standard 1/2 “The average sheet of drywall used in interior residential construction weights roughly 1.6 pounds per square foot, totaling 51.2 pounds. a 5/8 inch “A typical sheet of drywall, which is utilised to achieve fire ratings, weighs around 70 pounds.

What is the weight of gypsum board, as well? Weight: 5.9–6.8 kg/m2 (1.2–1.4 psf) 4′ x 4′ x 4′ x 4′ x 4′ x 4 (1220 mm) 54” standard (1375 mm) 8′ (2440 mm) to 12′ (2440 mm) (3660 mm)

Also, what is the weight of a 4×10 sheet of 5/8 drywall?

Typical Drywall For sheets of eight, ten, or twelve feet, one-half-inch board weighs 54.4, 68, or 81.6 pounds. 5/8-inch-thick boards weigh 73.6, 92, or 110.4 pounds per eight, ten, or twelve feet. The weight of a quarter-inch board, which is only available in lengths of eight or ten feet, is 38.4 or 48 pounds, respectively.

5/8 drywall has a fire rating of what?

5/8-inch (15.9mm) thick Type X fire-rated gypsum drywall installed on each side of nominal 2-inch x 4-inch (38x89mm) wood studs spaced 16-inch (400mm) o.c. or 3-5/8 inch thick Type X fire-rated gypsum drywall installed on each side of nominal 2-inch x 4-inch (38x89mm) wood studs spaced 16-inch (400mm) o.c (610 mm) The assembly of steel studs spaced 24″ o.c. has a minimum fire rating of 1 hour, which is a common requirement for many projects.

Related Questions

What is the weight of 12 foot 5/8 drywall?

The weight of drywall at a thickness of 5/8″ is approximately 2.31 pounds per square foot. Total weights in pounds, on the other hand, may vary by size and brand. Standard drywall sheeting is 4′ by 8′ by 12 inches and weighs around 52 pounds per sheet. 4′ by 12′ by 12′ weighs around 77 pounds.

Is lightweight drywall a viable option?

Standard drywall and lightweight drywall are both suitable for any room in your home (save the bathroom), but the lightweight alternative is more user-friendly. Because it’s lighter, carrying it about and hanging it isn’t as tough.

What is the price of a 4×8 sheet of drywall?

$11 per sheet, 4′ x 10′ $13 per 4′ by 14′ board. Sheets that are 4′ by 16′ cost $15 each. $9 per 4′ x 9′ board.

What is the maximum weight that drywall can support?

Without anchors, how much weight can drywall support? This can range from 5 to 10 pounds, but keep in mind that drywall is a brittle material that will not sustain the weight for an extended period of time.

What is the cost of a drywall lift?

11′ Drywall Lift

$28.00 for a four-hour shift (Minimum)

Weekly Rent: $160.00

Daily Rate: $40.00

4 Weeks for $480.00

How many drywall sheets can a truck hold?

The bed is around 22 inches long, thus assuming 1/2 inch each sheet, you might fit about 40 sheets, or maybe 30 if you use thicker drywall. That will almost certainly exceed your payload capacity. Your payload capacity is your stipulation.

At Home Depot, how much does a sheet of Sheetrock cost?

Drywall Sheets That Are Similar

Price $11.28 $16.47

Ratings (317) (19)

Characteristics of Drywall

There are no other features.

Fire-retardant, sag-retardant

4×8 4×12 Width (ft) x Length (ft)

3/8 in. 1/2 in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.

How many screws are there in a drywall sheet?

Drywall screws are sold by the sheet. Every 12 inches, drywall screws should be put. When utilising 48-inch-wide sheets, this means that when the sheets are hung perpendicular to the framing, there will be five screws in each stud; two on the edges and three in the field.

Is it possible to use 3/8 drywall as a wall?

Depending on the spacing of the joists, the money you save by putting 3/8 “You’ll almost certainly lose since the thinner the drywall, especially on the ceiling, the more difficult it is to install. Even with 24″ joist spacing, 1/2″ will enough, although garage ceilings in many areas require 5/8” “due to fire code requirements

Ceilings are made of what kind of drywall?

1/2-inch: The standard thickness for interior walls and ceilings is 1/2-inch drywall panels. These panels are lightweight and simple to transport and hang. Ultra-light 1/2-inch panels, which are 13 pounds lighter than traditional 1/2-inch drywall, make things even easier.

How much does a drywall sheet of 10 feet weigh?

For 48″ wide sheets, lbs/ft3 calculations were used.

8 ft long 10 ft long lbs/ft3

Standard 1/4″ 38.4 25.6

3/8″ Standard 38.438.438.438.438.438.438.438.

38.4 51.2 mm Standard

Standard 5/8″ 38.4 64

How much drywall will I require?

Divide the entire square footage of the area by 32 (if using 4-by-8 sheets) or 48 (if using 4-by-12 sheets) to get how many drywall sheets you’ll need. Simply multiply the total number of sheets by the price per sheet to find the total cost. Don’t forget to factor in local taxes and delivery fees.

What is the weight of 1/2 inch plywood?

Weight of Softwood Plywood:

Actual Weight Thickness

22 lbs. 1/4″

28.5 lbs 3/8″

40.6 lbs 1/2″

48 lbs. 5/8″

What is the composition of drywall?

Drywall (also known as plasterboard, wallboard, sheet rock, gypsum board, buster board, custard board, or gypsum panel) is a panel made of calcium sulphate dihydrate (gypsum) with or without additives, typically extruded between thick sheets of facer and backer paper, and used to build interior walls and ceilings.

Is gypsum board a water-resistant material?

3, moisture-proof gypsum board and waterproof gypsum board are nearly same, but the waterproof gypsum board core and face paper are waterproof, and the waterproof gypsum board core and face paper are not directly exposed to the wet environment, nor to direct water or long-term soak.

Is there a difference between drywall and sheetrock?

To return to the Kleenex vs. generic brand example, Sheetrock is a name brand similar to Kleenex, and drywall is the same product with a different name. Sheetrock isn’t the only phrase used interchangeably with drywall; “stucco” is another.

Is it possible to use lightweight drywall for ceilings?

Drywall Strength in an Ultralight Package

The light wallboard from USG has “excellent sag resistance” and hangs well on ceilings with 24-inch on-center joists, according to the company. The product is also “stronger pound-for-pound than ordinary 1/2-inch drywall,” according to the company.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Read More

Recent