The most frequent Sanyo television remote codes are 1045, 1062, 1095, 1380, 0049, 0097, 0110, 0004, 0268, 0012, 0108, and 0180. Numerous universal remotes are programmable using Code Syncing, which does not require the entry of a code.
To programme a universal remote utilising Code Syncing, turn the television on and then push the TV button on the remote. Now press and hold the Code Search or Program Search button until the LED begins to flash on the remote. Press the Power button repeatedly, pausing between presses for 1 to 2 seconds, until the television turns off. Immediately following the television’s shutdown, press the Enter or Program button. Restart the television using the remote, and ensure that all buttons (such as Vol+ and Vol-) function properly. If there is no Code Search or Program Search button on the remote control, Code Syncing may still be implemented. To programme a remote that lacks a Code Syncing button without using a code, first turn on the television. Press the remote’s TV button. Now continually push the Power or TV button (allowing 1 to 2 seconds between presses) until the television turns off. Press the Power button once again to turn the television back on. Now verify that all applicable buttons function properly.