Some of the most common problems with Maytag Bravo washers are that they won’t start, the water fills slowly, water leaks, the door or lid won’t lock, and the washer overflows. Other problems are that the washer stops in the middle of a cycle, makes a lot of noise, and doesn’t drain or spin.
There are different kinds of Maytag Bravo washers, and each one has its own problems. For instance, the Maytag Bravos MTW6400TQo won’t turn on if the user control and display board is broken or if the power outlet is turned off.
When the water pressure in the house is low or when the water inlet valve is clogged, the washer’s water reservoir may fill slowly. If the drain pump has a hole or crack, water could leak out of the MTW6500TQo model. The door and lid may not lock because the door latch is broken.
When the power goes out, the Maytag Bravos MTW6700TQo washer fills up with water. The MTW6600TQ0 model might stop in the middle of a cycle if the water inlet valve is broken. If the pump or hose is clogged or the drain pump is worn out, the washer may not drain.
When the tub seal and bearing kit in an MTW6300TQ1 washer is worn, it makes noise. When the rotor assembly at the back of the tub is broken, the MTW6600TBO model may not spin or stir.